Because of the laser beam include high energy, it bring some risk if people do not operate it correctly. For example it can hurt organs, skins. Although the laser coding machine manufacturer take more device to protect the danger happen, but we still need pay attention to it. The specific performance as below:
1: There is a certain risky for people eyes after the Flying laser printer generate laser beam. The cornea and conjunctiva of the human eye are most vulnerable to light beam and other environmental factors attack. Ultraviolet with a wide band and infrared with a wavelength greater than 1400nm may damage the cornea. The laser with longer intensity may cause tissue damage around the imaging area, which has more serious consequences on the visual function.
2: Whatever Fiber, CO2 or UV Laser marking machine, their laser will hurt skins. Sometimes the skin is damaged to some extent, which is caused by photochemical reaction. The cause of skin injury may be photochemical reaction or thermal effect. In general, the severity of the injury depends on the length of the exposure. The damage of CO2 laser to epidermis is due to the heat conduction from cuticle to deeper. The intense irradiance at the fiber tip is used to vaporize or peel the tissue, so it is very dangerous for the skin near the focus.
3:Laser printers add the danger of radiation. The unmagnified electromagnetic radiation generated by the laser marking system will be emitted by the laser light exit or The gap in the case escaped. Due to the possibility of free radiation, it may cause harm, especially after long-term exposure to this radiation. some. Usually pay more attention to the tightness of the case, and avoid prolonged proximity to places where additional radiation may be present. In terms of the degree of harm, the harmfulness of carbon dioxide would be smaller. Because the damage caused by carbon dioxide can be repaired by itself after a long time. The damage caused by other lasers cannot be repaired. Therefore, pay special attention to safety protection when using these products! Production is strictly in accordance with operating rules. Another point is that different laser manufacturers have different laser standards.
CYCJET is a brand name of Shanghai Yuchang Industrial Company Limited. As a manufacturer, CYCJET have more than ten years’ experience for wholesaler and retailer of different types of handheld inkjet printing solution, Laser printing solution, portable marking solution in Shanghai China.
Contact Person: David Guo
Telephone: +86-21-59970419 ext 8008
MOB:+86-139 1763 1707(whatsapp)
SHANGHAI YUCHANG INDUSTRIAL CO., LIMITED
ADD.: 1/F BLDG 4, NO. 333 HUAGAO RD.,HUATING IND. ZONE, JIADING DIST., SHANGHAI (201816) P.R.C.
TEL: +86 21 5997 0419 FAX:+86 21 5997 1610 MOB:+ 86-139 1763 1707(Whatsapp) Email:firstname.lastname@example.org SiteMap