24 hours hotline: +86-139 1763 1707
Due to the recent company website upgrade, may cause the company email box can not successfully receive or send mail, even mail return or loss, so if you sent inquiry in the past time, but did not get our prompt reply, please copy mail to below email box for confirmation:
Mr David Guo: cycjet@gmail.com
Mr Eason Ren : cycjetlaser@gmail.com
Ms Lucy Liu: cycjetliu@gmail.com
Ms Arya Wang: cycjetwang@gmail.com
Mr Kevin Shao: cycjetshao@gmail.com
Thanks for your cooperation!
CYCJET Network Dept.
Product Categories
Handheld Inkjet Printers
Portable Inkjet Printers
Industrial Inkjet Printer
Fly Laser Marking Machine
Handheld Laser Marker
Portable Laser Marker
Contact Us

Yuchang Industrial Co., Ltd.
TEL:+86-21-59970419 ext.8008
Email: sales@cycjet.com
Web: www.cycjet.com

   News Detail

How to use Fly Laser Marking Machine

1. Printer Setup Warning:
  a. Printer"s power supply or electricity socket must be independent & Electricity must   be have earth wire.
 b. Printer must be connect earth wire before working.
2. Guidelines of Daily Maintenance:
Prohibit touching or knocking against the workbench when the machine is working.
The laser and the Optical Lenses are fragile, and need to be very careful and escape shocking when moving.
You must stop the machine when anything wrong with it, and ask the professionals to deal with.
Please notice the way of turning on and off the machine.
Keep the workshop and machine surface clean.
3. Working Environment:
Temperature: 5-40
Relative Humidity3080%non-condensing
Ventilation device is required, no strong shocking and hot body around. And workshop needs to be clean.
4. Details of Maintenance The Whole Printer:
Keep the workbench clean.
Wipe the transmitting mirror with carton fabric and alcohol regularly.
Lock the machine cabinet well, in case some metal drop into it to damage the circuit.
The scanning workbench is precise instrument, and the working environment must be clean.
Don’t be close to the laser when it working. If anything wrong, please ask the professionals to deal with.
If the laser decay and weaken, please turn off the machine first, then re-plugged the USB line between the PC and control card testing.
The lifetime of the fiber laser is 100,000 hours normally, and there won’t be anything wrong in 4—5years.
5. Normal Fault Checking:
a.      If the workbench doesn’t move, please check the following in sequence:
If the power supply is in good connection
If the power line is in good connection
b. If there is no laser output from the laser, please check the following in sequence:
If the power supply is in good connection
If the power of the software is too low (the best in 50%---90%)
If the optical system was broken
Re-plugged the USB line between the PC and control card
c. There is laser outputting, but shallowly carving even the power is normanal, please check:
Check the focal length
If the optical system skewing
If any dirt on the transmitting mirror surface
Re-plugged the USB line between the PC and control card
d.      If the carving lines are out-off-straight, please check:
If the marking head loosening
If the machine doesn’t connect the earth wire
If there is any external electromagnetic interference

Copyright 2013 Yuchang Industrial Co., Ltd.   TEL:+86-21-59970419 ext.8008 MOB:+86-139 1763 1707 FAX:+86-21-59971610  
handheld inkjet printer  hand jet printer  Laser Marking Machine    Industrial inkjet printers

鎵嬫寔鍠风爜鏈  鍠风爜鏈  婵鍏夊柗鐮佹満  娴疯绀